23rd September 2022 in Community News, Press releases, Project news
Whitby Lobster Hatchery has announced that two offshore wind farms will increase and extend their support to help the charity officially open its doors for the first time and continue its work to create a sustainable future for the Yorkshire coast and the local Whitby area.
Both Dogger Bank C and Sofia offshore wind farms will provide funds to the charity to help with the installation of the sophisticated hatchery equipment at its Whitby Fish Market site, which will be used to enable the of release of 100,000 juvenile lobsters into the ocean each year.
Sofia Offshore Wind Farm is 100% owned by RWE and Dogger Bank C, the third phase in the wider Dogger Bank Wind Farm, is owned by SSE Renewables (40%), Equinor (40%) and Eni Plenitude (20%). The projects are cooperating closely due to their proximity and to reduce impacts on local stakeholders, including the fishing community.
The Hatchery’s small but knowledgeable team works closely with the local fishing industry on its three aims of conservation, primarily of increasing local lobster populations; education to teach young and old about the marine environment, and promoting research in partnership with local universities. Its objectives align closely with those of both the wind farm projects and their owners.
Whitby Lobster Hatchery General Manager, Joe Redfern said:
“In what has been a concerning past few months for the North East coast, with extremely low lobster numbers and wash-ups on beaches, the hatchery hopes to be part of the solution releasing juvenile lobster into impacted areas.
“This funding, and the earlier support provided by both the Sofia and Dogger Bank projects has been hugely influential in helping us deliver our ambitions for the Whitby Lobster Hatchery. It has allowed us to continue to make great steps of progress with the hatchery installation.. Everyone at the hatchery project is extremely grateful for the support we have received from Sofia and Dogger Bank, and we look forward to collaborating in the future. “
The two separate wind farm projects are sited on Dogger Bank in the middle of the North Sea, more than 190 kilometres from the north-east coast of England. The power they produce will be transmitted by export cables that arrive on shore between Redcar and Marske-by-the-Sea, on Teesside.
Elizabeth Reynolds, Fisheries Liaison Manager for Dogger Bank Wind Farm, said:
“The charity has made huge strides since we initially lent our support, and we’re delighted to be able to help them reach new milestones along with neighbouring Sofia.”
“The project will undoubtedly bring huge educational, tourism and conservation benefits to Whitby and its surrounding communities, as well as helping the local fishing industry and supporting a more sustainable future in line with our own ambitions as a developer of renewable energy infrastructure.”
Carol Cooper, Sofia’s Fisheries Liaison Manager said:
“Sofia is proud to support the charity and acknowledge the great work that Joe and others have done to progress the Hatchery, which will give tangible benefits not only to the local fisheries industry, but to the wider community as well.
“By increasing awareness of the marine environment and importance of conservation, the hatchery will become a focal point in Whitby, benefitting the generations to come”.
As well as helping with the hatchery equipment, the support from the two offshore wind farms will be a catalyst for Whitby Lobster Hatchery to deliver its conservation aims of releasing 100,000 juvenile lobsters into the ocean every year. By rearing lobster larvae in the hatchery, the charity will dramatically boost the lobsters’ chance of survival. The conservation charity has high ambitions to ensure the protection and conservation of lobster populations in the region and help ensure the future of our fishing fleets.
They also hope to inspire young people on the importance of looking after their local environment and create an institute for important marine and fisheries research. The facility will provide an excellent opportunity for jobs and training. Recently they have taken their first intern from Teesside University as well as providing amazing experiences for volunteers. Check out their website if you would like to get involved.
Construction work at its fish market location in Whitby has now started, with the specialist designed lobster hatchery due to be open in October. Later this year work will begin to establish a visitors’ centre adjoining the hatchery. The Marine Discovery Centre will provide insight into the fishing industry, our native marine wildlife, and the importance of conservation projects such as the Whitby Lobster Hatchery.
For further information: www.whitbylobsterhatchery.co.uk
22nd September 2022 in Press releases, Project news, Supply Chain
NKT is set to produce low-carbon copper cables for the third phase of the world’s largest offshore wind farm, significantly reducing the project’s carbon footprint during construction.
NKT, its supplier and customers have entered into an agreement to use low-carbon copper for the 320 kV HVDC cables the company is delivering to the third phase of the wind farm, known as Dogger Bank C.
The use of low-carbon copper will reduce the carbon footprint of the HV cable systems by more than 23 000 metric tons of CO2 (1), which is equivalent to 7,700 average family cars driven for one year (2).
Following a preferred supplier agreement announced in 2020, Dogger Bank Wind confirmed NKT as the main contractor for delivery and installation of high-voltage DC (HVDC) onshore and offshore export cable systems for Dogger Bank C in June 2021.
Simon Bailey, Commercial Director for Dogger Bank Wind Farm at SSE Renewables said:
“Along with our partners Equinor and Eni Plenitude, we are constantly looking at ways to reduce carbon emissions as much as possible throughout the construction process. It is fantastic that our HVDC export cable supplier, NKT, will use a low-carbon copper, which will significantly reduce the carbon footprint of the construction works on Dogger Bank. The HVDC cable is a crucial component, as it will connect power generated from the windfarm to the national grid.”
Alexander Kara, President & CEO of NKT said:
“This pioneering cooperation with our customers and suppliers enables us to produce even more sustainable cables using low-carbon copper. I am pleased that we have set up this game changing collaboration, so we can continue contributing to connecting a greener world. This will ultimately help us meet our sustainability commitments, including becoming a net-zero emission company.”
The low-carbon copper cathodes come from the Boliden Aitik mine in Northern Sweden. Vehicles in the mine and the smelters are powered by fossil free electricity and the delivery of copper cathodes is done domestically by electric train from the mine to Elcowire in Helsingborg that in efficient processes then produces the low-carbon copper wires.
The use of low-carbon copper will significantly reduce the carbon footprint of NKT’s cables as it comes with less than half the carbon footprint of standard copper, which has been third-party validated The manufacturing of the high voltage cables takes place in NKTs factory in Karlskrona in Sweden, which is running on 100 % renewable electricity.
Installation of the cable system at Dogger Bank C in the North Sea will be done by NKT Victoria, one of the world’s most advanced and fuel-efficient cable laying vessels.
(1) Low-carbon copper from Boliden has a carbon footprint of less than 1,5 kg CO2eq/kg of copper, which is significantly lower than the European average of 4,1 kg CO2eq/kg of copper.
(2) Gasoline-powered family cars. Source: EPA-United States Environmental Protection Agency.
21st September 2022 in Construction, Press releases, Project news, Supply Chain
- Almost 73 miles of onshore HVDC cable weighing 3,500 tonnes installed in East Riding of Yorkshire
- Cable installation was carried out by North Wales-based Jones Bros Civil Engineering and supported by Bristol-based Powersystems UK and North Yorkshire cable specialists FB Taylor
- Initial ground preparation and drilling works supported by Essex-based Joseph Gallagher Group
- Cable work integral to future transmission of renewable energy from the world’s largest offshore wind farm to UK homes and businesses
The team building Dogger Bank Wind Farm has safely installed almost 73 miles of HVDC underground cables in East Riding of Yorkshire in another giant milestone for the world-leading project.
Onshore construction for the first two phases of Dogger Bank Wind Farm began in January 2020 when Jones Bros Civil Engineering broke ground near the village of Ulrome in East Riding of Yorkshire.
The North Wales civil engineering specialists have installed almost 73 miles of HVDC cables in East Riding, with support from Bristol-based Powersystems UK and North Yorkshire cable installation specialists F B Taylor.
Jones Bros commenced installation of the cable ducting system in spring 2020, with the support of Essex-based Joseph Gallagher undertaking a series of horizontal directional drills in preparation for cable installation works to begin last summer.
This latest milestone marks the completion of HVDC cable installation work in East Riding, with the team now focusing on the installation of around four miles of HVAC cable from its convertor station site near Beverley, to the Creyke Beck electricity sub-station near Cottingham.
Work is also underway to reinstate the land to its former condition, following completion of this part of the programme.
Onshore project manager for Dogger Bank Wind Farm, Oliver Flattery, said:
“The whole team has worked incredibly hard and diligently since the start of 2020 to safely and efficiently prepare the 30km route, through a combination of trenching and drilling methods, before installing protective ducts and then feeding 3,362 tonnes of underground cables through these ducts.
“This has been a huge undertaking, and one we’re all proud to have been part of.
“We thank local residents and businesses in East Riding of Yorkshire for their patience and understanding over the last 2 years while this work has been taking place.”
Dogger Bank Wind Farm is being built in the North Sea more than 130km from the Yorkshire coast in three phases known as Dogger Bank A, B and C. Dogger Bank A and B phases will connect to the national grid near Beverley in East Riding of Yorkshire, while Dogger Bank C will connect to the grid near Redcar in the Tees Valley.
The world-class renewable energy project, which will be capable of powering 6 million UK homes annually on completion, is a joint venture between SSE Renewables (40%), Equinor (40%) and Eni Plenitude (20%).
The electricity generated by the Dogger Bank A and B wind turbines will come ashore south of Bridlington at Ulrome in East Riding, and be transmitted via underground HVDC cables to the onshore convertor station site in East Riding.
The HVDC cable route ends at the convertor station site near Beverley, where two convertor stations are currently under construction. Here, the electricity will be converted from HVDC to HVAC current for transmission to homes and businesses via the UK grid network.
The Dogger Bank project is the first offshore wind farm in the UK to use HVDC technology, which allows electricity to be transmitted efficiently across long distances.
Jones Bros project manager James Lockwood said:
“Hitting this key milestone on the world’s largest offshore wind farm has been made possible thanks to the efforts of every individual on site.
“I know it brings everyone from senior managers to trainees and apprentices a great sense of pride to be associated with this project, and we’re excited to see how the rest of the scheme develops.”
Nigel Baldwin, Health and Safety Director for F B Taylor, said:
“Working on the largest offshore wind farm has been a humbling experience for all involved and something that we are immensely proud of. We would like to thank the full site team for their work ethic and support during this project and hope to be involved with many more offshore opportunities throughout the coming years”.
Jonathan Stock, Head of Projects for Powersystems UK, said:
“We are very pleased to announce the completion of the HVDC cable installation at Dogger Bank Wind Farm, the world’s largest offshore windfarm. This is a huge achievement for all involved and particularly the efforts of the Powersystems UK team, our supply chain partners FB Taylors and Collett Transport and partners Jones Bros.
“The team showed great pride, professionalism, proactiveness, partnership and priority towards health, safety, environment, and quality.”
Tony Matheson, Director at Joseph Gallagher Limited, said:
“This has been a fantastic project to work on over the past two years. Our team have been instrumental throughout, operating four horizontal directional drilling rigs simultaneously during peak times, installing an impressive 27km of duct in 140 drills – ranging from 50m to 620m and then returning to grout the cables after the install.
“It’s been a true collaborative effort working with Jones Bros throughout the project. The team’s work ethic shone through helping to deliver the project to programme and with safety at the forefront – something we are very proud to have been part of.”
Offshore construction work on the first two phases of the project began in April with the start of work to install sub-sea HVDC cables off the Yorkshire coast. And in July the project celebrated the successful installation of the first foundation in the North Sea. Next year the team will install the first turbine on Dogger Bank A, with a total 277 GE Renewable Energy Haliade-X turbines set to be installed on all three phases of the project by 2026.
Onshore work is also underway on the third phase of the windfarm in the Tees Valley, where the project is collaborating with neighbouring Sofia Offshore Wind Farm, owned by RWE, to minimise disruption to the local community.
ENDS
Picture caption: Dogger Bank Wind Farm has successfully installed nearly 73 miles of HVDC cables in East Riding of Yorkshire for the first two phases of the project.
22nd August 2022 in Community News, Press releases
- The scholarship fund will support students undertaking courses focussed on science, technology, engineering and maths (STEM) courses, to help young people prepare for working life in a net zero world.
- The programme is open to students in South Tyneside, Redcar and Cleveland and East Riding of Yorkshire.
- 62 scholarships are available during the construction of the wind farm, for students in these communities studying science, technology, engineering and maths subjects to support the cost of further education.
Students from coastal communities in the north and north-east of England are reminded that a new scholarship fund closes for applications in less than two weeks. Students can apply for a new scholarship fund to prepare them for working life in a net zero world.
Dogger Bank Wind Farm’s Scholarship Fund provides grants of £5,000 to local students undertaking science, technology, engineering and maths (STEM) courses in further education, with a total of 62 scholarships being awarded during the world’s largest wind farm’s construction phase.
The scholarship fund focuses on the areas of East Riding of Yorkshire, and Redcar and Cleveland, where the windfarm connects to the National Grid, as well as South Tyneside, where the Operation and Maintenance Base will be located.
The second round of the scholarship fund has proven very popular with lots of applications already received but students are reminded they only have until 1 September 2022 to apply for the second round of support. Further details and how to apply can be found at https://doggerbank.com/about/community/.
Steve Wilson, Project Director from Dogger Bank Wind Farm said
“Our scholarship fund has proven very popular with local students and we are delighted with the quality of applications we have already received but we remind local students the second round will close next month. We look forward to supporting and inspiring the workforce of the future as we continue our work to build the world’s largest offshore wind farm.”
Dogger Bank Wind Farm will be located more than 130 km off the Yorkshire coast and will generate enough renewable energy to power six million UK homes. A joint venture between SSE Renewables, Equinor and Eni Plenitude, SSE Renewables is leading on Dogger Bank construction and delivery while Equinor will operate the wind farm on completion.
In June 2021, Dogger Bank Wind Farm unveiled plans for a £1 million construction fund to support the coastal communities where its onshore infrastructure is being developed. The programme includes a significant investment in science, technology, engineering and maths, as well as an operators fund to support local causes. Further information is available at www.doggerbank.com/about/community/
Further details on the scholarship fund and the community investment from the wind farm can be found here.
Ends
Picture caption: The scholarship fund will support students studying science, technology, engineering, and maths, to help prepare them for the highly skilled jobs in a net zero world.
27th July 2022 in Construction, Press releases, Project news, Supply Chain
Dogger Bank Wind Farm has agreed a contract with Manor Renewable Energy (MRE) to provide the temporary offshore power solution to support the construction of all three phases of the wind farm.
The contract represents MRE’s largest challenge to date, and will lead to the creation of around 20 new jobs. The jobs will be based largely in the north and north-east of England, and will provide entry-level opportunities for those wanting to begin a career in offshore renewables. Many of the new workers will be based at a new temporary operational home to be set up by MRE in the north-east.
The generators will be manufactured in the UK by JCB at the company’s Staffordshire location.
In an innovative approach to tackle the challenge of working more than 130km off the Yorkshire coast, MRE will use its generator recycling strategy to streamline the number of systems required, maintaining and refilling them using walk-to-work vessels.
Toby Mead, Chief Operating Officer at MRE, said:
“Preparations for the first phase of the Dogger Bank Wind Farm project are underway now, with MRE input starting in early 2023. From our interactions it’s clear from the outset that the client’s project team are driven to deliver this project with as much local content as possible and that’s a real plus for this landmark UK project. Bringing new people into the offshore industry has always been an important part of our company recruitment process, and this project will allow for a large number of new hires to enter the wind industry and gain experience during the construction of the largest offshore wind farm in the world; and that’s an exciting prospect.”
Dogger Bank Wind Farm Senior Project Manager, Alan Borland, said:
“Manor Renewable Energy will provide us with a safe, reliable and flexible temporary power solution during the construction of our turbines.
“The company’s generator recycling strategy allows us to operate a much smaller number of generators than a typical operation of this scale and because our turbines will self-sustain once commissioned, we’re able to operate them for a short period of time.
We’re delighted to be able to award Manor its largest contract of this kind, that will in turn provide employment opportunities in a variety of roles based largely around the north and north-east of England.”
ENDS
Picture caption: Dogger Bank Wind Farm has agreed a contract with Manor Renewable Energy (MRE) to provide the temporary offshore power solution to support the construction of all three phases of the wind farm (Image source: Manor Renewable Energy).
